Printing Special Effects

There are a variety of treatments, which are printed on special procedures. There are many printing companies do this at home, and many of these procedures has been sent to the scenic highway specialize in "end of work". The stamping Foil, embossing, combination stamping, and Slots are the most frequently discussed. Foil stamping can be either a flat foil stamp or seal of the combination, where the image has risen above or below the surface of the leaf. Foil stamping is the process by which the foil substrate is transferred (on paper), through heat and pressure. Pressure applied through dies to transfer the image to plate letterpress usual. The disk is also heated to release the package to the substrate.

Dies are made of metal and are the most common metals: brass, copper and magnesium. Combination stamp dies truly remarkable picture of the package when dealing with the dead have the opposite image. The paper is then pressed the two heat transfer foil and emboss the image at the same time. Combination stamp dies are more expensive, but doing it is just the difference between the fixed costs of employment and seal combination. Relief is basically very similar to the process of foil stamping, there are only a transfer of aluminum foil. Either increase the level of image (paste) or cut (etched) from the original level surface of the paper. Blind is a relief when the picture was made is in the ink. If you crash, and you must subscribe to the ink color, called the register underneath. Which is the second death and dying are still able to emboss the book between. This pressure will help flatten the paper fibers to create the image.

Thermal image of reality can be improved by helping the smooth surface of iron paper. Die-cutting is a process where the steel rule die is used to cut paper to the desired shape of his death. This is how it is produced Pocket folders and other components in order. It is usually printed on a square or rectangular sheets and then die-cut to create a desired shape. Then the track is scrapped Die sheet or press or by hand. Nicks of die to prevent a piece from the same type of Slots. Pocket folders, brochures, direct mail, postcards, brochures, all the parts that can be diecut in specific shapes. Kiss Cutting diecutting is the process of die cuts in the first layer of material, but no more than aid.

The most commonly used material through the removal of the sign easy to support. Diecuts may be of any shape or size. Kiss cutting is usually a float plane Kluge or Heidelberg windmill. It normally causes a steel die. The pressure is regulated in only the first cut into the surface, but not the primary material.